Dhaka Mobile 

Logo 




Go Back  

Dhaka Mobile > Other Gsm/Mobile Related Forums > Universal Software

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Universal Software Write here for questions about Universal GSM Software. Example: USPU, twinsim, sms-soft, drivers...

Reply
 
Thread Tools Display Modes
Old 12-05-16, 12:41 AM   #1
Faruk_Patwary
VIP MEMBER
 
Faruk_Patwary's Avatar
 
Join Date: May 2009
Location: Oman
Posts: 1,114
Status: Offline
Sonork: 100.1671026
Thanks: 1,638
Thanked 2,258 Times in 820 Posts
Rep Power: 11
Faruk_Patwary is on a distinguished road
newstar.gif eMMC DL Tool For PC

eMMC DL Tool For PC

Share by Faruk Patwary


eMMC DL Tool is a small application that allows you to Flash or Write Stock Firmware on Qualcomm Devices (including smartphone and tablets). Here, on this page we have managed to share the eMMC DL Tool that works on Windows XP, Windows Vista, Windows 7, Windows 8, 8.1 and Windows 10.



Flash Firmware
eMMC DL Tool allows you to flash stock firmware on the devices running on Qualcomm Chipsets. Simply Launch the Tool and Load the Firmware Folder, then after choose the Port (where your device is attached to the computer) and Click on the DL Button to Start the Flashing Process.


Switch to DL Mode
This feature allows you to choose modes of connection between the device and the computer. For example, if your device is Dead or it is working normally then this feature will allows you to choose between them.


Setting Port
This feature allows you to setup the Port Number (where your device is attached to the computer). For example if you know the exact port ID in your computer where you have attached the device then you can setup it using this feature.


Download link


Keep in Mind:
[*] Works for Qualcomm Chipset Only: The Above tool only works to flash stock firmware on devices having Qualcomm Chipsets. It will not work for any other Chipsets.
  Reply With Quote
The Following 6 Users Say Thank You to Faruk_Patwary For This Useful Post:
ASM_FARUQUE (12-05-16), mosty654 (12-05-16), rahman2900 (12-05-16), rasel7902 (12-05-16), wiper_477 (13-05-16), x + x (13-05-16)
Old 12-05-16, 01:40 AM   #2
Faruk_Patwary
VIP MEMBER
 
Faruk_Patwary's Avatar
 
Join Date: May 2009
Location: Oman
Posts: 1,114
Status: Offline
Sonork: 100.1671026
Thanks: 1,638
Thanked 2,258 Times in 820 Posts
Rep Power: 11
Faruk_Patwary is on a distinguished road
Default Re: eMMC DL Tool For PC

How to use eMMC DL Tool..
follow this method




Step 1: Download and extract eMMC DL Tool and Drivers. After Extracting you will be able to see the following file




Step 2: Install the USB Drivers.


Step 3: Power Off your Android Device.



Step 4: Download the Stock Rom that you want to Flash on your Android Device and extract it on your Computer.

Step 5: Now, Open eMMC DL Tool (you have extracted this in Step#1) on Your Computer.


Step 6: Once eMMC DL Tool is launched, Click on [] Button and locate the firmware folder.


  Reply With Quote
The Following 2 Users Say Thank You to Faruk_Patwary For This Useful Post:
mosty654 (12-05-16), rasel7902 (12-05-16)
Old 12-05-16, 01:57 AM   #3
Faruk_Patwary
VIP MEMBER
 
Faruk_Patwary's Avatar
 
Join Date: May 2009
Location: Oman
Posts: 1,114
Status: Offline
Sonork: 100.1671026
Thanks: 1,638
Thanked 2,258 Times in 820 Posts
Rep Power: 11
Faruk_Patwary is on a distinguished road
Default Re: eMMC DL Tool For PC

Step 7: Once You have successfully added the firmware folder in the eMMC DL Tool, proceed to the next Step.



Step 8: Now, Connect your Android Device to the Computer (make sure it is power off and Press the Volume UP and Down together, connect the phone to the computer at the same time).


Step 9: Once you have successfully added the Android Device to the computer then Right Click on Computer > Manage > Device Manager.


Step 10: In Device Manager, Under the Ports Section you will be able to see the Port Number of your Android Device (Note the Port Number).




Step 11: Now, In eMMC DL Tool you can setup the Port Number.



Step 12
: Now, To Begin the Flashing Click on the DL1 Button.


Step 13: Now, eMMC DL Tool will flash the firmware on your Android Device.


Step 14: Once Flashing is completed, you will be able to see Green Pass Status.


.......Done......
  Reply With Quote
The Following 6 Users Say Thank You to Faruk_Patwary For This Useful Post:
mosty654 (12-05-16), rahman2900 (12-05-16), rasel7902 (12-05-16), SWAPAN_MISHRA (12-05-16), wawan84 (11-12-16), x + x (13-05-16)
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 03:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright DhakaMobile.com 2006-2016. All Rights Reserved.