Dhaka Mobile 

Logo 




Go Back  

Dhaka Mobile > GSM Mobile / Tablets Brands -Software Area > Android based Phones / Tablets > HTC android based

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools Display Modes
Old 07-06-16, 10:11 PM   #1
atonu-dhakamobile
Administrator
 
atonu-dhakamobile's Avatar
 
Join Date: Mar 2009
Location: your mind
Posts: 4,954
Status: Offline
Sonork:
Thanks: 1,954
Thanked 8,772 Times in 2,903 Posts
Rep Power: 10
atonu-dhakamobile is on a distinguished road
new1.gif HTC 816w (A5_DUG) Unbrick from Hard-Bricked (9008)

HTC 816w (A5_DUG) Unbrick from Hard-Bricked (9008)

Unbrick Htc 816w (A5_DUG)
Dead Boot-Loader (9008)

Symptoms of Dead Boot-Loader
--------------------------------------------------------------
Due to corruption of the Boot-Loader by many reasons, Qualcommdevices enters mode called (Qualcomm Emergency Download Mode),
So, when you connect the device to PC, You'll see something like this in the device manager,


------------------------------------------

Download Section
------------------------------------
Here is the full mmcblk0.img backup i've made and tested myself to unbrick alot of 816W,

mmcblk0.img

-----------------------
Here is the tool we're going to use to write the img file into theSD card,

Win32DiskImager
----------------------------


Unbrick Guide
---------------------------
Summary of the process
-------------------------------------------------
We will write an backup of mmcblk0 from a working device (same as the dead one) to an SD Card (same size as the internal memory),
Then we put that SD into the phone and let it boot from the SD Card,
Then we flash the phone with it's Official Firmware,
That's it


Detailed Guide
------------------------------
1. Go to the Download section and download both (mmcblk0.img and win32diskimager),
2. Connect 8GB SD Card to PC via SD Card Reader,
3. Setup Win32DiskImager and Run it,
4. From Win32DiskImager do as this image,




5. Just let it finish, Then disconnect the SD Card,
6. Make sure the device's battery is well charged,
7. Put the SD Card into the phone,
8. Now try to boot into bootloader mode by pressing,
Vol- & Power button
9. After few seconds phone should boot into bootloader mode,
10. Now flash your phone according to your device info and case
(S-OFF, S-ON, SuperCID, BL Locked or Unlocked)
11. After flashing process finish, Your phone now is bootable working as it should be,
12. There is no 12, we're done ..

------------------------------------------------------

Final Word
---------------------
This method not only works with 816w, it should work for allQualcomm devices, but you'll need the right mmcblk0.img backup.
I have tested this method myself with 3 phones, 2 of 'em are working fine now,
the third one powered on but it has a faulty EMMC so, it doesn't accept flashing, and here's one of the working,




I've been working on this for almost 3 days,
So, in case this guide was helpful for you,
Just hit "Thanks"



BEST REGARDS
----------------------------

Just share
===================================
Best Regards
atonu-dhakamobile
All Ways Flow The Forum Rules

We have come together as a forum to build more beautiful
  Reply With Quote
The Following 4 Users Say Thank You to atonu-dhakamobile For This Useful Post:
Auto Updater (08-06-16), Gsm Xlocker (07-06-16), Liton_Bkash (07-06-16), rasel7902 (08-06-16)
Old 07-06-16, 10:12 PM   #2
atonu-dhakamobile
Administrator
 
atonu-dhakamobile's Avatar
 
Join Date: Mar 2009
Location: your mind
Posts: 4,954
Status: Offline
Sonork:
Thanks: 1,954
Thanked 8,772 Times in 2,903 Posts
Rep Power: 10
atonu-dhakamobile is on a distinguished road
Default Re: HTC 816w (A5_DUG) Unbrick from Hard-Bricked (9008)

Here is how to read mmcblk0.img form a working phone,

1.Root the phone,
2. Install BusyBox
  • HTC devices doesn't accept regular "busybox",
    so, we have to install it via "BusyBox on Rails",
    and here is the premium version,

    BusyBoxOnRails
3. Put an SD Cardin the phone(8 or 16GB), then enable "USB Debugging",
4. Connect phoneto PC and run this commands from PC one by one,
  • adb shell
  • su
  • dd if=/dev/block/mmcblk0 of=/sdcard2/mmcblk0.img
5. Now reading process started and you have to wait for it to finish,
6.After process finish, you will have the "mmcblk0.img" file in your SD Card, Now just copy this file to your PC and follow the rest of the guide,

>>DONE
===================================
Best Regards
atonu-dhakamobile
All Ways Flow The Forum Rules

We have come together as a forum to build more beautiful
  Reply With Quote
The Following 4 Users Say Thank You to atonu-dhakamobile For This Useful Post:
Auto Updater (08-06-16), Gsm Xlocker (07-06-16), Liton_Bkash (07-06-16), rasel7902 (08-06-16)
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright DhakaMobile.com 2006-2016. All Rights Reserved.