||Thread Tools||Display Modes|
|14-11-16, 01:30 AM||#1|
Join Date: May 2009
Location: Online BD
Thanked 581 Times in 327 PostsRep Power: 10
One plus3 dead boot repair 100% tested
A hard bricked OP3 has nothing but a black screen (nothing ever comes on the screen, not even a boot logo), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition (It might be a flickering OnePlus logo). The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OP3 should be detected as QHUSB_BULK,Unknown Device,Qualcomm something. You might have a bricked OP3 as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition. Most of the times, it is needed because OEM Unlocking is disabled, and phone can't boot and no recovery.
The solution for OP3 hardbrick is similar to OPO - you just need a Qualcomm driver and a recovery package. A very very big thanks to some guys at XDA who got these files (don't know how) (I have modified the Method 1 file but Method 2 file remains exact from OnepLus) and helped all of us to get out from one of the most weird state of the phone. Thanks guys ( @CyberCROC and 1 more)
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753
2.) Recovery Tool :- https://www.androidfilehost.com/?fid=24591000424942611
3.) [OPTIONAL :- Will be required only if you don't have a working system] Latest OxygenOS :- https://www.androidfilehost.com/?fid=24591020540821926
Step 2 :- Extract Drivers and Recovery Tool files on Desktop.
Step 3 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how....igned-drivers/
Step 4 :- Press the power button for 40 seconds to turn off the phone.
Step 5 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 6 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices.If you are unable to see 9008,see the end of post for various other methods to show Qualcomm 9008.
Step 7 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 8 :- Click start at top left corner and wait for it to finish (green text will come).
Step 9 :- Disconnect phone from PC and boot into system.
........................NEXT STEPS ARE TO BE FOLLOWED ONLY IF YOUR OP2 DOESN'T BOOT INTO SYSTEM STILL BUT IS STUCK ON ONEPLUS LOGO..............................
Step 10 :- Boot your phone into recovery (Power+Volume Down).
Step 11 :- Click on Install Update.
Step 12 :- Install adb for windows system-wide if not already installed :- [TOOL] [WINDOWS] ADB, Fastboot and Drivers -… | Android Development and Hacking
Step 13 :- Navigate to the folder containing Latest OxygenOS Zip. Shift+Right Click anywhere in the folder and Open Command Window.
Step 14 :- In the command window,type :-
and wait for it to finish.Then reboot into system.
Always Follow Forum Rules Here
Use Only Thanks Button
Use Search Button Before make a Thread