Dhaka Mobile 

Logo 




Go Back  

Dhaka Mobile > GSM Mobile / Tablets Brands -Software Area > Smart Phones & PDA/PALM Organizers > Smartphones ( WM Without Touchscreen)

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Smartphones ( WM Without Touchscreen) HTC, I-mate, Qtek, HP, Hitachi, and many other SmartPhones windows CE base devices

Reply
 
Thread Tools Display Modes
Old 02-03-10, 06:57 PM   #1
Anwar Telecom
VIP MEMBER
 
Anwar Telecom's Avatar
 
Join Date: Nov 2008
Location: Bangladesh
Age: 33
Posts: 1,420
Status: Offline
Sonork: 100.1586139
Thanks: 513
Thanked 3,660 Times in 1,155 Posts
Rep Power: 12
Anwar Telecom is on a distinguished road
Default How to HARD RESET POCKET PC DEVICES!!!

As sad as it may sound, there will come a time when you have to hard (or full) reset your Pocket PC. To hard reset a device means to restore the device back to it's original settings, just like it was when it came out of the box. You usually need to hard reset the device when you are having problems that a simple soft reset will not fix, if you want to sell the device and clear all your personal information off of it, or if you just feel lucky. There are a few things to note before completing this task. For one, make sure you truly want to do a hard reset. Back up all your information just in case you feel like you want to take a step back. Secondly, understand that even if you do a hard reset information in the ROM (on iPAQs it's known as the iPAQ File Store) will still exist. You'll want to delete this information manually if needed. Third, if you are trying to hard reset your device because you forgot your password, some device will have the password stick even after a hard reset. To truly get past this you will have to enter the password incorrectly or answer hints incorrectly a certain amount of times before it commits to a self-destruct process performing a hard reset on itself. And lastly, we here at Pocket PC Addict care about our Addicts, but we unfortunately cannot take responsibility for anything that you do. Please do this at your own risk.

The Process
Okay, after you've read all that you're probably too tired to do a soft reset on your device. If you're like me you probably skipped all the jibber jabber just to get to the meat of the article which would be here. This article will be updated regularly as devices become available.

Dell Axim X3 / X3i / X30:

To hard reset, press and hold the power button and press in on the reset button (reset hole) on the back of the unit for about 2-5 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. To do so press the Contacts button.

Dell Axim x50 / x50v / x51 / x51v:

Make sure the device is on before performing hard reset. To hard reset, press and hold the power button and press in on the reset button (reset hole) on the back of the unit for about 2-3 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. To do so press the Contacts button. To cancel press the Mail button.

HTC Apache / Sprint PPC-6700 /Verizon XV6700:

While holding both softkeys (buttons with “-“ on them), push in on the reset button once. Make sure you are still holding onto the softkeys. A confirmation screen should appear asking you if you want to reset all data. Press Y to reset, N to cancel.

HTC Wizard / i-mate K-JAM / Cingular 8125 / T-Mobile MDA:

While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.

Note: The Cingular 8125 also has a software hard reset option. You can find this application in the Settings folder under "Clear Storage."

HP iPAQ h1900 Series (1910 / 1915 / 1930 / 1935 / 1940 / 1945) and HP iPAQ h6300 Seies (6310 / 6315):

While holding down the power button press in on the reset button (reset hole) with your stylus (located on the left hand edge of the unit rather than the bottom) for about 5 seconds.

HP iPAQ h2000 Series (2210 / 2215):

While holding down on the far left (calendar) and far right (iTask), press in on the reset button on the back of the unit for about 5 seconds. After you see the screen fade, release all buttons. You can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. To reactivate the battery you must either connect the iPAQ back to AC power or press the reset button again with your stylus.

HP iPAQ h5000 Series (5450 / 5550 / 5555) and HP iPAQ h3800 Series (3830 / 3835 / 3850 / 3855 / 3870 / 3875):

While holding down on the far left (calendar) and far right (iTask or Today) press in on the reset button (reset hole) with your stylus for about 2-3 seconds. After you see the screen fade, you can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. To reactivate the battery you must either connect the iPAQ back to AC power or press the reset button again with your stylus.

HP iPAQ hw6500 Mobile Messenger Series (6510 / 6515), iPAQ hx2000 Series (2410 / 2415 / 2710 / 2715) and HP iPAQ hx4700 / hx4705:

While holding down on the far left (calendar) and far right (iTask) press in on the reset button (reset hole) with your stylus for about 2-3 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is to the left (locked).

HP iPAQ rx3115 / rx3715:

While holding down on the far left (Mobile Media) and far right (iTask) press in on the reset button (reset hole) with your stylus for about 2-3 seconds.

HP iPAQ rz1700 Series (1710 / 1715):

While holding the far left (Mobile Media) and far right (Today) buttons, press in on the reset button (reset hole) on the bottom for about 2-3 seconds. To verify that you have hard reset you device, press the power button. If the device does not turn on then you have successfully hard reset you device. To reactivate the PDA, either connect the device to the AC adapter or press in on the reset button.

Palm Treo 700w:

Make sure that the Treo isn’t connected to AC power. To perform a hard reset press and hold the Power/End button. While holding the Power/End button press in and release the reset button. When you see the confirmation screen asking you if you want to erase all data, you can release the Power/End button and press the up button on the directional pad to confirm the hard reset.

Toshiba e310 / e330/ e335 / e350 / e355 / e400 / e405 / e570 / e740 / e750 / e755 / e800 / e805:

Make sure your device is off before performing hard reset. While holding the power button press in on the reset switch with your stylus then release the power button. When a screen appears release the reset switch.

HTC Universal / T-Mobile MDA IV / Vodafone VDA IV / O2 XDA Exec / i-mate JasJar / Q-tek 9000 Orange / SPV M5000:

With the device open, press the two soft keys together while pressing in the reset button on the back of the unit with your stylus. If done correctly you should see a screen that says "Press 0 to reset to factory defaults or X to exit." Press 0 to confirm the factory reset.

HTC Magician / Dopod 818 / Q-tek S100 / T-Mobile MDA Compact / O2 xda II mini / i-mate JAM:

While holding down the power button press in on the reset button (reset hole) with your stylus for about 5 seconds.

HTC Blue Angel / Siemens SX66 / T-Mobile MDA III / i-mate PDA2K:

While holding down the power button press in on the reset button (reset hole) with your stylus for about 5 seconds.

O2 XDA / QTek 1010 / HTC Wallaby / Siemens SX56 / T-Mobile MDA:

While holding down the power button press in on the reset button (reset hole) with your stylus for about 5 seconds.

Asus A632 / A636:

While holding down the power button press in on the reset button (reset hole) with your stylus for about 5 seconds.

BenQ P50:

While holding down the power button press in on the reset button (reset hole) with your stylus for about 5 seconds. Once screen fades press the power button again to activate the unit.

ETEN M500:


While holding down the power button press in on the reset button (reset hole) with your stylus located on the side for about 5 seconds.

Mitac Mio A701:

Make sure the device is turned off then press and hold the Down volume button and the End button at the same time. Release both buttons when the device vibrates. The unit will turn on automatically and the Setup Wizard will display. Follow the instructions to complete the
hard reset.

Mitac Mio A201:

Remove the battery cover. Use the stylus to slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. Install the battery and immediately press the Record Button. The screen will show "cold boot" and "loading......" Replace the battery cover.

Mitac Mio 168:

On the back of the unit, slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. The unit will restart with defaults loaded.

O2 XDA Atom / O2 XDA Atom Pure / HP rw6828:

To perform a hard reset, use the stylus while pressing into the reset hole, press the power on/off button at the same time. Screen will prompt you to press the Green call and Red end call button together to confirm on hard resetting the device. *Note: Hard resetting the device will cause the device to be reset back to its original factory default settings and all data will be lost.

PS ALL of this i have copied from another forum so if the author (TIM) sees this then do not despair all credit goes to you my friend.

Enjoy
  Reply With Quote
The Following User Says Thank You to Anwar Telecom For This Useful Post:
Old 02-03-10, 06:58 PM   #2
Anwar Telecom
VIP MEMBER
 
Anwar Telecom's Avatar
 
Join Date: Nov 2008
Location: Bangladesh
Age: 33
Posts: 1,420
Status: Offline
Sonork: 100.1586139
Thanks: 513
Thanked 3,660 Times in 1,155 Posts
Rep Power: 12
Anwar Telecom is on a distinguished road
Default Re: How to HARD RESET POCKET PC DEVICES!!!

Perform a RESET of your PDA/pdaPHONE

Soft Reset

A soft reset tells to your device to stop what it is doing and to restart.
All records and programs stored in device will be retained after a soft reset.
After resetting, the usual start screen will appear.
Use a soft reset when your device seems to have crashed or hanged.
This type of reset is the first to try, before any others, to solve the above problems.
This kind of reset is, usually, well known by the user and really easy to perform.

Find the reset button on the handheld device.
It is located in a hole on the back of the device.
Get your stylus or the reset tool located in your stylus,
or any other object with a small end (a paperclip if any).
and push with it into the reset button inside the hole.

Exception: Hp h19xx - Dell AXIM the reset button is on the left-hand side
of the unit and this happens now for many pda/phone also
. For h1940 there is a reset nib in the stylus that can be
found by unscrewing its top.
Hp 36xx/37xx series can perform an hard reset if you press
the reset button for more than 3 seconds. Reset button is at
bottom right of the device
Quite unusual for HTC Touch HD the position of the Soft reset
button that is under the battery cove between the Sim and the
Card slotsr


Hard Reset (or Full Reset)

Performing a hard reset, all settings, records and programs stored in the Pda
(except the ones stored in Rom) will be erased.
After a Hard Reset formats, preferences, and other settings will be restored
to the factory default settings.
You can restore any previous data if you got a Backup of your device before
the hard reset otherwise you will need to reinstall any third-party applications.
If you are hard resetting your device owing to some hard problem i suggest
to restores installed applications without using the backup if you are not sure
that backup data do not include the problem you wish to solve also.
In few words a hard reset allows you to start everything over from scratch.

WARNING: for WM 5.0 users (wrongly called also as WM 2005)
The new operative system Windows Mobile 5.0 totally modified the use and the construction of the
internal memory of the PDA. For all the models that use this new O.S. the Ram is used only as the
operative memory while the users' programs before loaded into the same kind of memory are now
stored in Rom (or FRom, FlashRom etc) that is working now as an HD and is no longer subject to
the lost of data following a full discharge of battery.
What said above causes a possible different execution of the usual HardReset operation.
We can note that, while the soft reset is still unchanged, for the classic Hard Reset, that resumes
the original default setting, has been added new processes with different name and result quite
different from the hard reset as usually known.
We may say something like the Warm reset of Palm already used.
So for any new pda will be added the new procedure if any (the one that is different from the
classic Hard Reset ) and it will be shown by a different colour.

ATTENTION: The soft reset requires only to push a button and the only
difference is the place where this button is located.
It is not so easy to perform an Hard Reset as, in many cases
each group of devices has its own procedure and buttons
locations.
To try to make it easy the instructions are shown quoting the relative devices:

AUDIOVOX /-
1032C Maestro
Press the power button while pressing and holding the reset switch with the stylus, and then release the power
button. When a screen appears, release the reset switch. When initialization is completed, the Welcome screen
appears. Set up the system as in the case of startup process.

ACER /-
n10/n20/n30
for the soft reset note that these model have the button in different places (at the bottom, rear or side).
To perform an hard reset you need instead to to toggle the reset switch to the left and back to the right.
The reset switch is usually at the bottom of the devices except for n20 model for which you have to remove battery
as the reset switch is located in the right side of the battery bay.
n50
For this model to perform a soft reset use the tip of the stylus to press the reset button inside the hole on the left
side of the unit. To perform an hard reset, while holding the Today and Messaging buttons, press the reset button
inside the hole as detailed above.
n300
While holding pressed the Messaging and Today buttons in front of the device, press the reset button into the hole
at the bottom of the handheld.

ASUS /-
MyPAL 620
Press and hold at the same time the button 3 (Contact) and the stylus in the "Reset" button located on the right
of MyPal to access to "BIOS" . Using the stylus press the button "Reset" and all is done.
It appears that there is another way to perform an Hard Reset on this device. Push and hold power button and
press the reset button and all is done.
a716
This device has in the space under the battery a little switch that you can move to disable the Backup battery.
As to reach the switch you removed the main battery, this action performs an Hard Reset.
(this is another way along with the mutiple buttons to avoid accidental hard resets)
a730
You can use the second procedure mentioned above for the a620, I.E.
To press the power button and at the same time the soft reset button using the stylus.
a632/a636
To perform an Hard reset press and hold the power button while you press the tip of your stylus on the reset
switch at the bottom. This will cancell all data that unit is elaborating reinstating the device to the default setting
of the watch.
To perform a Clean Boot (that really coorrespond to a true Hard Reset), press the Speaker (-) button and at the
same time the button Change Modality and also the stylus on the reset button. This will reinstate the device to the
original default setting.
a626/a686/a696
To perform a clean reset, press the launch button simultaneously pressing the stylus on the reset button. Then
when a warning message appears follow the instructions and press to do clean reset, or press to leave the
operation screen. Performing a clean reset will delete all data.
Mars II/(O2 xda Zinc)
To perform a hard reset, use the stylus to reach the reset button found besides the device's camera button.
Keep the stylus on the reset button and press the Up Navigation button at the same time.
P535 - P735 - P750
To restore default settings tap Start > Settings > System tab > Default Settings.
Input ‘1234’ in password field and tap Ok confirm that you want to restore the default settings.
You can also perform the hard reset by pressing the UP button of the navigation key and the reset button at
the same time.
P526 - P527 - P550
To restore default settings tap Start > Settings > System tab > Default Settings.
Input 1234 in password field and tap Ok confirm that you want to restore the default settings.
You can also perform the hard reset by pressing the UP button of the navigation key and the power button at
the same time.
P320
To restore default settings (i.e perform a Hard reset) tap Start>Settings> System (Tab)> Default Settings
Thence insert password (1234 by default) to confirm hard reset and tap OK
NOTE: No hard reset procedure using buttons appears to be available in the manual

BENQ /-
P50
Press and hold power button. At the same time use the stylus to press the recessed Reset button.
When the screen has faded off release both buttons and when the power indicator light up green press the power
button to restart the unit.

CASIO /-
E-115/125 & EM-500
The procedure is less authomatized than the others. Remove the CompactFlash card and power on the unit.
Holding down the power button, use the stylus to press the reset button for about 2 seconds.
You will see shown on the screen: "Proceeding with this operation initializes memory. Press (Action) to proceed
or (Start) to cancel". Press the (Action) option to perform the Reset.

CLIE Sony /-
Connect the CLIE handheld using the AC adapter and take out the stylus pin by twisting the upper part of the stylus.
Push down and hold the power button of the unit and use the stylus to slowly press and release the reset button on
the back.
When the Palm screen will appear release the power button. At the "Erase all data?" prompt, push the upper part of
the scroll button on the front of the device to confirm OK. The Sony pda is now resetted and you have only to follow
the SetUp steps as prompted.

COMPAQ /-
Aero 15xx Series
Remove both the main and backup battery, wait at least 1 minute, then replace the batteries.
(Backup Battery on the left side)
iPaq 3600, 3700 Series 36xx bottom
Press the recessed soft reset button in the hole on the bottom right for more than 3 seconds to perform a hard reset.
You can also perform a hard reset opening the door on the bottom left of the device and moving the switch behind
the door to obtain the same result
iPAQ H3800/H3900/5450/5500
To perform a hard reset first remove the expansion packs if any, thence turn the device on (not connected to AC
power) and press
and hold two outside buttons ( 1 Calendar and 4 iPAQ Task ), also insert stylus into
the reset button at bottom of iPAQ and pressing and holding this for 5 secs. Release the above buttons in any
sequence. To reactivate iPAQ, insert stylus into soft reset button or simply connect iPaq to AC adapter.

DELL /-
Axim x5/ X3i
Another procedure a little more involved than the others.Press and hold the Power Button thence, using the stylus
press and hold the reset button on the left side of the unit until the message "To clear all data press the Contacts
button" is shown.
Press the required button located to the left of the directional pad. When you see the message "Tap the screen to
set up your Pocket PC" execute the requested action and follow the instructions on screen to set up your PDA again
Axim X30 / X50
To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
for about 2 seconds. Follow the instructions shown.
Axim X51
To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
Release the 2 buttons and you will see on the screen the instructions To clear all data in the memory
Press Contacts button to complete the hard reset. Otherwise press Mail button to cancel the operation.

ETEN /-(glofiish)
m500
Press and hold the power button and at the same time press, using the stylus, the Reset button on the device's side.
M600 - G500
Press and hold the power button and at the same time press,using the stylus, the Reset button on the device's side.
Release both buttons at the same time and reply YES to the questions to cancel registry and to reinstall default
settings.
X500
Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons simultaneously.
Next, hold the End Button until the system inquiry screen is displayed, then release the End Button and answer the
question(s).
M700
Hold the Power button and press the Reset button using the stylus. Release both buttons at the same time and
next press the 'End Button' until the inquiry screen appears. Reply to the question.
x500+
If the touch screen is functional then tap Programs> Utilities and than Default Setting.
Otherwise Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons
simultaneously. Next, hold the End Button until the system inquiry screen is displayed, then release the End Button
and answer the question(s) to perform a clean boot (Hard Reset).
x800, M800, x600, x650
To perform a Clean Boot(Hard Reset) hold the “Power Button” and press once on the “Reset Button” with the
tip of the stylus, and release both buttons simultaneously. Next, continually hold the End Button until the
system inquiry screen is displayed, then release the End Button. Answer the question(s).
Otherwise, if the Touch screen is currently working then select Programs> Utlities> Default Settings

FUJITSU-SIEMENS /-
Loox 400 series
Simultaneously press reset button at the bottom using stylus cap and the Suspend/Resume button on top front
of the unit. After about 10 seconds a pictures will appear on th screen and a tone sounds
Loox 720 - 710
Use the point into the unscrewed stylus cap to press the soft reset button at the bottom and at the same time
press the button suspend/resume in front right corner. After about 10 seconds, when you will see a new screen
image and you will hear an advice sound, follows the relative instruction.
Loox n500/520
Take the stylus and screw it apart.
Press the tip into the soft reset opening and at the same time the suspend/resume and calendar buttons
Hold the suspend/resume and the calendar button pressed for a few seconds. The reset can take a few minutes.
A signal is sounded after the reset is complete. Follow the instructions
T830/T810
Slide off the battery cover and quickly remove an then refit main battery. Wait few seconds and athe same time
press the End button and the Reset button using the stylus tip. The screen will show some options.
Select SKIP to perform a normal cold start, or Factory Defaults if you confirm to performe an Hard Reset.
When a signal will sound follow the instructions on the screen

GARMIN /-
iQue 3000
press the reset button on the unit's back. Immediatly after press and hold the Power button until you see the
Palm Logo. Then release the Power button. You will see on the screen a message advising you are about to erase
all unit's data. Now you can press the upper half of the scroll button in front of the device to confirm the hard
reset or any other button to execute a simple reset instead.

GIGABYTE /-
g-Smart (i.Bond)
Press the power button on the top and on the keypad press 7 and 9 (three buttons together)
It will display "formating" (Hardreset)

HANDSPRING /-
Hold down the power button on the front panel of your handheld. Holding down the power button, press the reset
button by paper clip. As soon as you see the logo on the screen, release the power button.
Press the up scroll button on the front panel to perform a hard reset or press any other button to perform a soft
reset. You can restore backed up data by performing a HotSync operation.

HP /-
Jornada 520, 525, 540, 545, 547, and 548
Press and hold the soft reset button and press the power button.
Jornada 564, 565, 567, and 568
Perform a soft reset using the button on the back of the device, thence remove the main and backup battery for
some minutes. (The backup battery is locked on the left side of the device)
iPaq 19xx Series
These devices can be hard reset by pressing and holding the soft recessed button on the left-hand side of the
device while you are pressing and holding the power button at the top the unit. Keep buttons pressed for several
seconds until the screen fades.
iPaq 22xx Series
Press and hold Buttons 1 (Calendar) and 4 (iTask) on the front of the device and, at the same time, press the Reset
button on the back of the Pocket PC using the device's stylus.
Hold thel buttons until the screen begins to fade (about 3/4 secs). Release the buttons and stylus. If the device
has been fully reset, it does not power on and you must reactivate its battery connecting the same to the AC power
or pressng the usual soft reset button with the stylus.

Note: The iPAQ 19xx & 22xx series have a feature called "iPAQ
File Store" allowing to store some data and programs in
the Flash ROM. If you used this option, the hard reset will
not cancel the data stored therein. Moreover if this area
become garbled you risk to have to reflash the Rom.
Do not store date exceeding its storage's space.

iPaq 41xx Series
Press and hold the Power button and at the same time press Reset button in the device's back using the stylus.
Release first the power button , thence the Reset button and you will see the device to reset and to power on
again with original setting.
iPaq rz17xx, rx31xx, rx34xx, rx37xx series
Press and hold the extreme left button (Mobile Media) and the extreme right button (iTasks) at the same time and
use the stylus to press the reset button at the bottom of the unit. When the screen fades release the two buttons
and button under the stylus. If the unit does not power on authomatically perform a simple soft reset.
iPaq hx4700
Press and hold calendar and iTask buttons in the front area, while, holding down the buttons, press using the stylus
the reset button on the bottom for about 2 seconds.
iPaq hx2750
press and hold button 1 and 4 on the front of the device and at the same time use the stylus to press reset button
on the bottom of the ipaq.
iPaq h6300
Press and hold the Power button for about 3 seconds while at the same time you press by the stylus the reset
button on the left side of the unit. When the screen blanks release both the buttons and wait that the device
powers on.
iPaq rx1950
To perform a clean reset and return you HP iPAQ to factory settings press and hold the calendar and the iPaq
Wireless buttons. While holding down the buttons lighttly press the Reset button by the stylus for about 2 seconds.
When the HP iPAQ screen begins to fade, release the two first buttons and then remove the stylus.
Plug the device into AC adapter o press Reset button again to restart unit.
hx2000 series (not h2210)
Press and hold down Calendar and iTask buttons. While holding down these buttons, use the stylus to press the
Reset button on the bottom of the iPAQ for about two seconds. When the Pocket PC screen begins to fade, release
the mentioned two buttons first, and then remove also the stylus from the Reset.
hw6500 series
To perform an hard reset hold down the Power button and use the stylus to press the recessed Reset button on
the bottom for about five seconds. The screen fades and the device resets. Once the device resets and the screen
comes back on, release the Power button and remove the stylus from the Reset.
hw69xx series
To perform an Hard(clean) Reset press and hold the Answer/Send, Power, and End Call buttons. While holding these
buttons, by the stylus press the Reset button on the bottom of the iPAQ until the device restarts.
When the HP iPAQ restarts, release all of the buttons, Reset button included.
rw 68xx series
To perform an Hard(clean) reset and return your HP iPAQ to factory settings:
1. Press and hold the Answer/Send, Power, and End Call buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ
until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button.
rx 57xx/59xx
To perform an Hard Reset(called factory reset) press and hold the Quick Launch and Rotate Screen buttons.
While holding these buttons, use the stylus to press the Reset button until the device restarts.
When the HP iPAQ restarts, release all of the buttons, and remove the stylus from the Reset button.
iPaq 900 Series
WARNING. The process named HARD reset is not a real hard reset but only a sort of Soft Reset
HARD RESET
A hard reset stops all running applications, but does not erase any programs or saved data. A hard reset
also resets all hardware registers. Be sure to save any unsaved data within a running application before
To perform a hard reset: Locate the recessed Reset button at the top of your HP iPAQ.
Use the stylus to lightly press the Reset button.
Release the Reset button.
To perform a factory reset (the TRUE HARD RESET)-A factory reset clears all user settings, programs, and data.
Turn off your HP iPAQ.
Press the OK button located on the right side of the unit and the Voice Commander
button located on the left side of the unit.
Keeping the ok and the Voice Commander buttons pressed, use the stylus to lightly
press the Reset button then release the Reset button.
Release the OK and the Voice Commander button when Clean Boot is shown on the screen.
NOTE: You can also tap Start > Settings > System > Factory Recovery, and then follow the on-screen instructions.
iPaq 200 and iPaq 100 series
To perform a hard reset press the Application Key 3, Application Key 2, and the Voice Recorder button at the same
time and hit the Reset button once.
Hold the Application Key 3, Application Key 2, and the Voice Recorder button pressed until Clean boot is displayed
at the bottom of the screen.


HTC /-
qTek 2020-9090-S100 e Xda-Mda-O2-iMate etc
Press and hold the power button and use the stylus to press the soft reset button at the bottom of the unit at
the same time
HTC Wizard(qTek 9100 e i-Mate K-Jam, O2.. etc)
Press and hold the Comm.Manager button along with Voice Command button.
While pressing the two button on the device, use the stylus to press and hold the reset button on the side.
HTC Prophet (Qtek S200,Imate JASmin etc)
Press and hold the CAMERA and COMM MANAGER buttons, and use the stylus to press the RESET button.
Holds the CAMERA and COMM MANAGER buttons until the following message is displayed: “Press Send to restore
factory default or press other key to quit".
HTC TyTN(Hermes,Qtek9600,JasJam etc)
Always switch off the device before to execute a full reset. The full reset is the Hard Reset of the device an to
execute it push and hold at same time both the SoftKey left and right on the front of the unit while you use the
stylus to press the soft reset button at the bottom of the device.
HTC Universal(qTek 9000 e i-Mate JasJar, Mda Pro..) etc
Press with the fingers the two keys at the same time and keep them pressed. In addition by the stylus
press the pin into the RESET opening on the back of the device. Thence pressing 0 button confirm the Hard reset
or, using 'x', choice to not perform the Hard Reset.
(be careful to execute an hard reset under WM 5.0 read device's manual before)
HTC P3300 Artemis - HTC P3600 Trinity - HTC P3350 Love
Press and hold left and right button - SOFTKEY and using the stylus press the RESET command of the device.
Release the stylus, but hold the above buttons and release them when the screen shows the following message:
“Press SEND to restore manufacturer default, or press ..................”
Now you can press the required button (green call icon)
HTC P3400 Gene
To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
time, use the stylus to press the RESET button at the middle left side of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset
all settings to manufacturer default. Press Send to restore
manufacturer default, or press other keys to cancel.
Release now the two SOFT KEYs, and then press the TALK (Send) button
HTC P4350
Press and hold the left and right SOFT KEY, and at the same time, press the RESET button by the stylus.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message:
''This operation will delete all your personal data, and reset all settings to manufacturer default......''
Release the two SOFT KEYs, and then press the SEND button
HTC X7500/7501-(ATHENA/ADVANTAGE/Dopod U1000/T.Mobile AMEO)
Slide the Volume slider down and at the same time, use the stylus to press the RESET button at the back of your
device. After a brief period of time, two choices will appear on-screen. Press the CENTER OK button to perform the
hard reset. (Otherwise, if any, press the CAMERA button to exit.)
HTC S620 Excalibur (T.Mobile Dash, Dopod C720W) - HTC S710 Vox
click Start > Expert > Cancel memory to performe an Hard Reset and follow the instructions shown on the screen.
The smartphone will restart immediately after the reset.
HTC Startrek Qtek 8500 (iMate SmartFlip/Qtek 8500/Star100/Dopod S300/Cingular 3125)
To reset the smartphone click Start > Accessories > Clear Storage. Follow the on-screen instructions to hard reset
The phone will restart after the reset.
HTC Touch Elf
Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the
bottom of your device. Release the stylus, but continue pressing the above buttons until you see the following
message on the screen:
"This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Action to restore manufacturer default, or press other keys to cancel."
Release the TALK and END buttons, and then press ENTER on your device.
Another way of clearing the device storage and reset all settings back to factory default is to use the
Clear Storage feature. You will lose all your data and files on the device storage when you use it, so
make sure to do a backup first.
Tap Start > Settings > System tab > Clear Storage. Enter “1234” then tap Yes.
HTC TyTN II (Htc Kaiser o P5500) o Vodafone v1615, T.Mobile Vario III,AT&T Tilt
To perform a hard reset (also known as a full reset) press and hold the left SOFT KEY and the right SOFT KEY,
and at the same time, use the stylus to press the RESET button at the bottom of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see a cancel message on the screen
A this time release the two SOFT KEYs, and then press the button Send/reply with Green icon on your device.
Important: If Encrypt files placed on storage cards, backup all files using ActiveSync thence afer the procedure,
copy your files back to the storage card otherwise you will be unable to access to them.
If the unit works fine but you need to performe an hard reset yo can use also:
Tap Start > Settings > System tab > Clear Storage. Enter “1234” then tap Yes.
HTC Diamond Touch - HTC Touch Pro (Raphael)
To perform a hard reset, with the device turned on, press and hold the VOLUME DOWN and ENTER buttons.
Thence press the RESET button with the stylus tip. Release the RESET button, but continue pressing VOLUME DOWN
and ENTER buttons until you see the warning message on the screen.
To confirm Release the VOLUME DOWN and ENTER buttons then press VOLUME UP button to restore manufacturer default,
or press other keys to cancel.
As usual you can use also the Clean Storage as follows:
On the Home screen, slide to the Settings tab > tap All Settings > tap Clear Storage and select the option you like to apply.
Enter "1234" then tap Yes.
HTC Touch HD
To perform a hard reset
With the device turned off, press and hold VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see the message:
"his operation will delete all your personal data, and reset all settings
to the manufacturer default settings. Press VolUp to restore manufacturer
defaults, or press other keys to cancel."
At this time Release the VOLUME UP and VOLUME DOWN buttons and press the VOLUME UP button to perform the hard reset.
As usual you can use also the Clean Storage as follows:
On the Home screen, slide to the Settings tab > tap All Settings > tap Clear Storage and select the option you like to apply.
Enter "1234" then tap Yes.
HTC Touch Cruise 09 (Iolite) - HTC Touch 3G (Jade)
To perform a hard reset Power off your device.
Press and hold the VOLUME DOWN and ENTER buttons, and then press the POWER button.
The following message then appears on the screen:
"This operation will delete all your personal data,
and reset all settings to manufacturer default.
Press VOLUME UP to restore manufacturer default,
or press other keys to cancel."
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to hard reset your device.
On the Home screen, slide to the Settings tab> tap All Settings > On the System tab, tap Clear Storage > Enter “1234” and then tap Yes.
HTC Touch Viva (Opal)
To perform a hard reset remove the back cover and with the device turned on, press and hold the TALK/SEND and END buttons, then press
the RESET button with the stylus tip. Release the RESET button, but continue pressing the TALK/SEND and END buttons until you see this
message on the screen:
"This operation will delete all your personal data,
and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or
press other keys to cancel."
Release the TALK/SEND and END buttons, then press the TALK/SEND button to perform the hard reset, or any other button to cancel the reset.
You can also use Clear Storage to hard reset your device.
On the Home screen, slide to the Settings tab> tap All Settings > On the System tab, tap Clear Storage > Enter "1234" and then tap Yes.

I-MATE /-
Ultimate 8150, Ultimate 6150
To perform a hard reset (also named a Cold Boot) by accessing the Master Clear Application:
Tap Start > Settings > System tab > Factory Setting - enter 1234. Confirm by tapping Yes.
The system will reboot to complete the operation. Alternatively, perform an hard reset
simultaneously holding the Power button and push the soft reset button inwards.
Release the buttons and the device will hard reset.

MITAC /-
Mio P350/P550
You can go back to the factory default executing an hard reset from Start-> Settings-> SysInfo-> Clean Boot
The display will show two methods:
Method 1: It will clean all data. Include Mio Map.
Method 2: It will clean all data, except Mio Map.
Mio a701
Make sure that A701 is turned off then press and hold at the same time the Down Volume button and the End button.
When the unit start to vibrate you can release both buttons. The unit will turn on automatically and it will show the
Setup Wizard. Follow the instructions to complete the operation
Mio a201
Remove the battery cover by pressing and then sliding the cover off.Use the stylus to slide the ON/OFF switch to
the ON (left) position . (ON to OFF , then OFF to ON) Install the battery and immediately press the Record Button.
The screen will show "cold boot" and "loading......" At this time, you must replace the battery cover.
Mio 168
Close all the running programs. On the rear of the unit slide the battery switch to OFF.
After about 1 minute return the switch on the ON position. The unit will restart with the original settings.

MWg /-
Atom life
To perform a hard reset be sure that you have backed up all your data in a Mini SD card or on your PC
before performing a hard reset.
2. Press and hold the power button, and then use the stylus to press the soft reset button at the same time.

NEC /-
MobilePro P300
Hold the Power and Record buttons down and insert your stylus into the reset hole.

PALM /-
To perform a soft reset on a Palm (Handspring also) device find the reset button located in a hole on the back of
the device. Using the tool in your stylus, or some other object such as a paperclip press reset button inside the hole.
There is also another form of Reset: Warm Reset
A warm reset bypasses any system extensions (such as HackMaster hacks, operating system patches, and so on)
that are loaded on the device. A warm reset often bypass the "boot loop" error, allowing you to remove applications,
previously installed, causing problems. All stored data in the device remain unchanged with a warm reset.
To perform a warm reset hold down the top scroll button and press the reset button inside the hole on the back of
your unit. When in the Palm display you see the general preferences screen, release the top scroll button.
After a warm reset, you may need to perform a soft reset to get the device working as normal.
Performing a hard reset you start everything over from scratch. Be sure to back up your files first.
Perform a hard reset only if a soft or warm reset does not solve your problem.
To perform a hard reset hold down the power button (Wireless Mode button on the Treo 600) and press the reset
button on the back panel. When the Palm screen appears, release the power button.
You will get a message informing that you are about to erase all your data. To continue, press the top scroll button.
To cancel, press any other button. In this case you will get a soft reset only.
After a hard reset calibrate the digitizer and verify time & date.

QUANTA /-
xda Atom
Press and hold the power button, and then use the stylus to press the soft reset button at the same time.

SAMSUNG /-
sgh i620
To reset your device press the Start soft key on the screen. Select Settings . More... . Security . More... Reset.
Enter the reset password and press the Done soft key. (The default password is “1234.”)
Tap on Yes to confirm the reset, thence press the Yes soft key to confirm deleting DRM files.
The device resets and reboots itself.
sgh i600
You can hard reset your device as follows: . On the screen, press Start.
Select Settings > More...> Security> More... > Reset. Enter the reset password and press the Done soft key.
(The default password is “0000.”). Press the Yes soft key to confirm the reset. Press the Yes soft key to
confirm deleting DRM files. The device resets and reboots itself.
sgh i320
On the Home screen, press the Start. Select Settings . More... . Security . More... .Hard reset.
Enter the initialisation password and press Done. (The default password is “1234.”)
Press the Yes soft key to confirm. The phone resets and reboots itself.

TREO palmOne /-
Treo650
Remove battery cover and find the Reset hole beside the battery (without removing the battery). Press and Hold
down the Power/End button and using the stylus press and release the RESET button in the hole.
Release the Power/End button when the Palm Powered logo appears and when you will be asked if you wish to
remove all data press the Up button to confirm the Hard Reset.

TREO /-
Treo 680
Remove back panel to expose the battery. Hold the power button down on the unit.
While holding the power button, remove the battery.Keep holding the power button and place the battery back
The Palm Treo 680 will reboot and you will see a message asking if you would like to delete all data.
Release the power button and press UP on the 5-way navigator. You will have to sync Treo to restore data.

TOSHIBA /-
Toshiba E310
Slide the white switch on the bottom left to the left for a few seconds. The manual says depress the power button
at the top with the stylus in the hole in the back and release the power button.
Toshiba E740
Slide the white switch at the bottom of the device to the right for few seconds, thence slide it back.
Toshiba e800/805
Use the stylus to move to the right the switch under the rubber cover that you find above the wifi switch on the
bottom of device. After few seconds reinstate switch to original position.
Portege C500 (RG4-E01)
Click Start > Settings > More > Perform Hard Reset then follow the on-screen instructions to reset the phone
that will restart after it has been reset.
Portege C900 (RG4-E02) Satellite
After you tried restarting your Toshiba phone, if it still deadlock or freeze, press the Reset button.
Even it still deadlock or freeze, remove the battery then re-insert the battery and turn your Toshiba phone on
and reinstate all settings.
portegè G910/G920
to perform a Hard Reset (a master Clear for Toshiba) from Today screen Tap Start>Setting>SystemTab>Master Clear
Enter code to confirm execution and Tap the Reset button to reinitialise your phone.The phone will restart after the reset
restored to its default factory settings. All the user data and programs on your Toshiba phone will be formatted.

UBIQUIO /-
501
To perform a hard reset press and hold the Comm Manager button and Voice Command button on the device.
Keep the two buttons pressed, and at the same time, use the stylus to lightly press and hold the RESET button.

others will follows
  Reply With Quote
The Following User Says Thank You to Anwar Telecom For This Useful Post:
Old 02-03-10, 06:59 PM   #3
Anwar Telecom
VIP MEMBER
 
Anwar Telecom's Avatar
 
Join Date: Nov 2008
Location: Bangladesh
Age: 33
Posts: 1,420
Status: Offline
Sonork: 100.1586139
Thanks: 513
Thanked 3,660 Times in 1,155 Posts
Rep Power: 12
Anwar Telecom is on a distinguished road
Default Re: How to HARD RESET POCKET PC DEVICES!!!

ACER N50
Hold down the today and the mail buttons. Simultaneously press the reset button.

ACER N300
Hold down the HOME and the IN BOX buttons. Simultaneously press the reset button for about 2 seconds.

Asus A632 - A636
Hold down the power button and press in the reset button for about 6 seconds.

BenQ P50 - BenQ/Siemens P51
Hold down the power button and press in the reset button with your stylus for about 6 seconds. Once the screen fades, press the power button again to activate the unit.

Dell Axim X3 - X3i - X30
Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.

Dell Axim x50 - x50v - x51 - x51v
Turn the device ON. Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.

ETEN M500
Hold down the power button and then press the reset button for about 6 seconds.

ETEN M600
Hold down the power button and the (CTRL - ALT!) button simultaneously and then press the reset button for about 2 seconds. Then release all buttons at the same time.

Fujitsu Siemens Loox N560
Press & hold the power & calender button, then press & release the reset button. Continue to hold the power & calender buttons for a few seconds. When you release the power & calender buttons the unit should beep & then reset.




HP iPAQ h1900 Series (1910 - 1915 - 1930 - 1935 - 1940 - 1945) - HP iPAQ h6300 Series (6310 - 6315)
Hold down the power button and press the reset button about 6 seconds.

HP iPAQ h2000 Series (2210 - 2215)
Hold down the Calendar and iTask buttons, and then press the reset button on the for about 6 seconds. After the screen fades, release all buttons. You can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. Now you can connect iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ h5000 Series (5450 - 5550 - 5555) - HP iPAQ h3800 Series (3830 - 3835 - 3850 - 3855 - 3870 - 3875)
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. After the screen fades, you can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset your unit. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ hw6500 Mobile Messenger Series (6510 - 6515), iPAQ hx2000 Series (2410 - 2415 - 2710 - 2715) and HP iPAQ hx4700 - hx4705
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is set to the left.

HP rw6828 - O2 XDA Atom - O2 XDA Atom Pure
Press the reset button with your stylus, then press the power ON/OFF button at the same time. A confirmation screen should ask you to press the green call and the red end call buttons together.

HP iPAQ rz1700 Series (1710 - 1715)
Hold the Mobile Media and the Today buttons, then press reset button for about 4 seconds. To confirm, press the power button. If the device does not turn on then you have successfully hard reset you device. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ rx3115 - rx3715
Hold down on the far left (Mobile Media and the iTask buttons then press the reset button for about 6 seconds.

HTC Apache - Sprint PPC-6700 - Verizon XV6700
Hold both the softkeys (buttons with “-“ on them), push the reset button once. Release just the reset button while still holding onto the softkeys. A confirmation screen should appear asking you if you want to reset all data. Press Y to reset, and N to cancel.


HTC Blue Angel - i-mate PDA2K - Siemens SX66 - T-Mobile MDA III
While holding down the power button press in on the reset button (reset hole) with your stylus for about 6 seconds.

HTC Magician - Dopod 818 - O2 xda II mini - i-mate JAM - QTek S100 - T-Mobile MDA Compact
Hold down the power button and press the reset button for about 6 seconds.

HTC Trinity - HTC P3600 - Dopod D810 - Dopod CHT 9100 - Orange SPV M700 - Vodafone VPA compact GPS
Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot.

HTC Universal - T-Mobile MDA IV - Vodafone VDA IV - O2 XDA Exec - i-mate JasJar - QTek 9000 Orange - SPV M5000
Press the two soft keys together then pressing the reset button on the back of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.

HTC Wallaby - O2 XDA - QTek 1010 - Siemens SX56 - T-Mobile MDA
Hold down the power button and press the reset button for about 6 seconds.

HTC Wizard - Cingular 8125 - i-mate K-JAM - T-Mobile MDA
Hold the Comm manager button and the Voice Command button, the press the reset button once. Hold the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To reset, press the green send key.


Another is from original manual:

After pressing the reset button with the stylus you must CONTINUE TO HOLD the Comm Manager and Voice Command buttons until you see a message asking you to press the send button (the green phone) to perform a hard reset. Following this, wait patiently and the K-JAM should eventually boot into Windows Mobile.


Mitac Mio 168
On the back of the unit, slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. The unit will restart with the default settings.

Mitac Mio A201
Remove the battery cover. Use the stylus to slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. Install the battery and immediately press the Record Button. The screen should show "cold boot" and "loading......" Replace the battery cover.

Mitac Mio A701
The device must be turned off. Press and hold the down volume button and the end button at the same time. Release both buttons when the device vibrates. The unit will turn on automatically and the Setup Wizard will be displayed. Follow the instructions to complete the hard reset process.

Palm Treo 700w
Hold the Power-End button and then press the reset button. When the confirmation screen asks you “Do you want to erase all data?”, you can release the Power-End button and press the up button on the directional pad to confirm the hard reset.

Toshiba e310 - e330 - e335 - e350 - e355 - e400 - e405 - e570 - e740 - e750 - e755 - e800 - e805
Device should be off. Hold the power button and press the reset button then release the power button. When the screen appears release the reset button.

Viewsonic V36 - V37
Device should be off. Slide the grey latch on the right hand side of the unit to open the battery compartment. Slide the short grey switch above the battery bay to the OFF position and remove the battery. After a brief few seconds, insert the battery. Then slide the short grey switch above the battery bay to the ON position. Now, replace the cover and slide the grey latch back to the lock position. Turn unit ON.

Xda Orbit
Press the two soft keys together then press the reset button on the side of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.

FSC LOOX T810/T830
Slide off the battery cover from the Pocket PC. At the same time press and hold the End Call button and press the tip of the stylus pen into the soft reset opening. Release the end button as soon as a list of possible options is displayed on the screen. Select Skip if you would like to perform a normal cold start. To restore the Pocket PC to the factory defaults select Factory Defaults.




MATE PDAL

To hard reset, hold down the two soft key buttons directly below the screen, and press the reset pin.
You will be presented with a menu saying 'press R to reset, X to exit'
Phone must be powered on without sim card


Trin 100

Hard reset key have try and test
should work 100 %


Also the Camera & Power button with soft reset doesnt go to bootloader, just make soft-reset, aswell as the Hard-Reset by the pad-buttons doesn't work.
When you press the stylus in the reset hole - keep pressing the buttons until you see the bootloader


Dopod 838

Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.

Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "--" keys just up the start and OK buttons)




Htc hera100

User lock: hold down 2 softkey below screen and push reset with stylus after read black screen press green button.




Dopod c800 /htcc800/hera100 here
To perform a hard reset

1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.

2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”

3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.


Wiza100 dopod838 hardreset key here(non 3g)
Hard reset : holding the comm manager and voice button and pressing the reset button with the stylus.




O2 - ST20F freez on O2
1. Turn off phone.
2. Press hold & left + right soft menu key

3. While still holding left + right soft menu key then on/off button & release.

4. Keep left + right soft key pressed until you see the message:
"Press 0 to restore fatory setting, other key to quit"
5. Press 0 and wait for the phone to boot up, the restoring of factory default will begin and will ask to reboot your phone when done.




HTC s710

Hard reset
*Turn off your phone,
* then press both *SOFT KEYS* and *POWER ON* device.
*After moment release both soft keys.
*On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.


HTC EXCA 100

Hard Reset ....

Step One:
Preform power down *Hold the power button* Till the phone is 100% powered down and all you see is a black screen
*keep in mind if your device is plugged into a power source or computer link this will not work!*
Step Two:
(Use both hands while doing this it will be much easier!)
Place 1 finger on each of the Soft keys.
Step Three:
Press the power Button and hold for no more than 2 sec well holding the two soft keys (do not hold the power button till the phone turns on) ONLY PRESS THE POWER BUTTON DO NOT TURN THE PHONE ON. After pressing the power key keep your fingers on the Two Soft keys until you see a the phone turn on and a black screen come up with white writing. Once you see this screen Press the Green Send key and there you go you have just performed a hard reset on the T-Mobile dash without using the settings screen on the phone.




TOSHIBA G500 HARD RESET WAY+KEY
WAY=
tap start > setting
tap the system tab
tap master clear
enter the confirmation code in the code : field
tap the reset button to reinitialise you phone
your phoen will restart after it has been reset

KEY=
TURN pda off press and hold the green button on the slide+BS(Del)+Power until the light go on. Then a red screen apears answering if you want a clean boot (y/n) press Y and the pda resets when you power on again it will install the windows as new.




Glofish x500
1. Press the power button.
2. Press the SR button and release both power and SR button, right after this, press on the "END Call" red button,
3. keep holding the red button until you see a white message with Return to factory defaults.
4. press the Left Soft key for 3 seconds untill the yes is selected




HTC P4550 / HTC TyTN II / Orange & HTC TyTN II / Vodafone VPA Compact V / Vodafone v1

Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone

Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel




XDA II : O2 XDA EXEC

Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.
  Reply With Quote
The Following User Says Thank You to Anwar Telecom For This Useful Post:
Old 02-03-10, 06:59 PM   #4
Anwar Telecom
VIP MEMBER
 
Anwar Telecom's Avatar
 
Join Date: Nov 2008
Location: Bangladesh
Age: 33
Posts: 1,420
Status: Offline
Sonork: 100.1586139
Thanks: 513
Thanked 3,660 Times in 1,155 Posts
Rep Power: 12
Anwar Telecom is on a distinguished road
Default Re: How to HARD RESET POCKET PC DEVICES!!!

HTC DIAMOND 100 HARD RESET

To perform a hard reset

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.

Clear Storage

You can also use Clear Storage to reset your device back to factory default settings and/or format the internal storage.
DONT FORGT FR THANKS:O
  Reply With Quote
The Following User Says Thank You to Anwar Telecom For This Useful Post:
Old 19-07-13, 01:27 PM   #5
khairulislam
I'm New Here
 
Join Date: Apr 2011
Age: 29
Posts: 2
Status: Offline
Sonork:
Thanks: 1
Thanked 10 Times in 2 Posts
Rep Power: 0
khairulislam is on a distinguished road
Default i-teq x-bond hard reset ok

i-teq x-bond hard reset 100% ok.......call key+windosekey+call end key+lock key+poweron .....wite some time...don't forget thanks
  Reply With Quote
The Following User Says Thank You to khairulislam For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 04:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright DhakaMobile.com 2006-2016. All Rights Reserved.