Dhaka Mobile 


Go Back  

Dhaka Mobile > Product Support Sections > Hard/Software-Products > Advance Box

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Thread Tools Display Modes
Old 03-04-16, 03:29 PM   #1
Auto Updater
Auto Updater's Avatar
Join Date: Jan 2009
Location: BD+UAE
Posts: 1,171
Status: Offline
Thanks: 1,912
Thanked 2,401 Times in 786 Posts
Rep Power: 10
Auto Updater is on a distinguished road
Lights 1 ERROR: EMMC WAS NOT Detected! (CMD1)--Solution

Error --

2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB."

Check your Test Point Soldering!
CMD1 Reply: 0x00000000

ADAPTER USED --ATF 4in1 Adapter V2

Solution --

1. Check and confirm soldering is perfect. Reduce wire length as low as 5cm

If you are getting same error --

2. --

4 in 1 Adapter --

  • Check 1.8V, 2.8V And 3.3V are OK
  • 3.3V may be near 3V only--IF 3.3v is not OK continue --IF OK Please STOP HERE and excuse me

Why 3.3V is not OK??

  • There should be at-least 1.25V difference between Input and output of AMS117 series regulators
  • Its a 5V to 3.3V regulator

Input for AMS117 3.3V regulator?

  • Input of AMS117 - 4.2V
  • Output expected 3.3V But since min. V difference between I/P and O/P is 1.25V, SO , obtained O/P 4.2V-1.25= 2.95V

So the 3.3V is not getting.

What to do?

  • Remove AMS117 3.3V regulator
  • Provide 3.3V externally.
  • Set max current 200mA
  • Vcc - 2.8V , Vccq - 3.3V
Note-- If Box goes OFF when connecting adapter, remove R3 (zero ohm R) near sd-card connector

Please DO NOT send me PM's for help, You can ask for help on forum !
Do not post THANKS posts - use thanks button !
ALWAYS use SEARCH button before posting !
  Reply With Quote
The Following 5 Users Say Thank You to Auto Updater For This Useful Post:
Auto Updater (03-04-16), nasir raaz (03-04-16), rahman2900 (03-04-16), Ripon_Manikganj (03-04-16), sumit070 (03-04-16)


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 07:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright DhakaMobile.com 2006-2016. All Rights Reserved.