Dhaka Mobile 

Logo 



Go Back  

Dhaka Mobile > GSM Mobile / Tablets Brands -Software Area > Android based Phones / Tablets > Sony Android based

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 14-03-13, 09:20 PM   #1
Parvez Telecom
No Life Poster
 
Parvez Telecom's Avatar
 
Join Date: Oct 2010
Location: Bangladesh
Age: 32
Posts: 1,073
Status: Offline
Sonork: Not Use
Thanks: 2,501
Thanked 3,951 Times in 1,578 Posts
Rep Power: 11
Parvez Telecom is on a distinguished road
Default Plasma Tool v.1.0.2.8 released. Exclusive.

What this tool can do:

- Unlock all Sony Xperia 2010 Year (under test, private only)
- Unlock all Sony Xperia 2011 Year( with Test Point) (under test, private only)
- Flash All Sony Xperia/ Sony Mobile Android based mobile phones
- First in the World: Read Trim Area from Running OS via ADB( Android Debug Brigde, ADB - included)
- First in the World: Write Trim Area from Running OS via ADB (Android Debug Bridge, ADB - included)*
- Trim Area Backup Read using ADB/BootLoader(for test or Security reason)*
- Trim Area Backup Write using ADB/Bootloader**
- Single Trim Area element Read/Write*

* Not all TA elements can be written or read and not all Platforms support it.
** Not all TA elements can be written or read.

!!!Software require Internet Connection for all operations!!!



http://www.mediafire.com/?a1g88np6piq82p1
  Reply With Quote
The Following 5 Users Say Thank You to Parvez Telecom For This Useful Post:
...hafizul... (19-10-17)
Old 14-03-13, 09:23 PM   #2
Parvez Telecom
No Life Poster
 
Parvez Telecom's Avatar
 
Join Date: Oct 2010
Location: Bangladesh
Age: 32
Posts: 1,073
Status: Offline
Sonork: Not Use
Thanks: 2,501
Thanked 3,951 Times in 1,578 Posts
Rep Power: 11
Parvez Telecom is on a distinguished road
Default Re: Plasma Tool v.1.0.2.8 released. Exclusive.

Usage:
!!!IMPORTANT!!! Before any operation with any new phone - Back it UP! Later
you can restore it if somethings gone wrong.

A) To read/write Trim Area
using ADB:
1. Connect your phone to PC using USB Cable.
2. Enable USB-Debugging in Settings->Development menu
3. Install drivers
4. Go to TA work tab, click ADB in the software and press Connect.
If you need to Cancel you can click cancel to stop operation
5. Wait software to check root in your phone and try to root it.
6. If your phone is not rooted you recieve a message how to rootyour phone.
7. Click Backup TA. All your TA will be backed up and saved in new
folder, same as your imei number
8. If you need to restore phone - click Write TA from Backup
9. If you need to read/write single element: enter element number in
heximal (for example 7da) and press read/write
9a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

using BootLoader:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Go to TA Work tab and click Bootloader
6. Click Connect button. If you need to cancel you can click cancel
to stop operation
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. After successfull connect Click Backup TA (for your security)
9. If you need to restore click Write TA from Backup
10. If you need to read/write single element: enter element number
in heximal (for example 7da) and press read/write
10a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

B) To flash a S1_Boot android phone
1. Go to Flasher tab
2. Follow the procedure 1 of the read/write TA using BootLoader
(Traning)
3. Click Open firmware (acceptable formats: zipped firmware bundle,
with loader.sin inside), file format - zip or 7z (7-zip)
4. Select files to flash(eg. 1 file or All files)
5. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
6. Install Drivers (x64 or x86 - according your system OS)
7. Stand by, software detect phone and send the loader.sin from the
archive
8. Click Flash when phone is connected and software hint says "You
can press the Flash button now"
8a. Keep in mind, the system.sin takes longer at 99%, this is ok,need wait.

C) To unlock phone
without Test Point (2010 phones only):
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install Drivers (x64 or x86 - according your system OS)
3. Check if driver install ok
4. Disconnect phone
5. Enter your user id and password
6. Click unlock
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. Follow the on screen instructions (some phones require one or two
reboot).

with Test Point:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Connect the Test Point.
6. Install Drivers (x64 or x86 - according your system OS)
7. Keep the Test Point connected
8. Click Unlock
9. Stand by.
9a. Longer in description faster in process about 20 seconds.

Here some test logins users for

User login: ZKIZSTXW password : UKAOXTWB

User login: LWAIOJFK password : PBXAUIED

User login: UUKNTEBV password : FXSBHTIP

User login: OTVRLCSP password : FYJQVXBL

User login: GXUDIJHG password : VECRRDDW

User login: TIMBMMRS password : BUIVVKAI


User login: VGVKZFGE password : LPVHZAYB

User login: VNXNKZYT password : FBBNAMLL

User login: DUVKITWO password : BHQXRKSA

User login: WGZHMMXW password : HBEXDSEY
  Reply With Quote
The Following User Says Thank You to Parvez Telecom For This Useful Post:
Old 14-03-13, 09:24 PM   #3
Parvez Telecom
No Life Poster
 
Parvez Telecom's Avatar
 
Join Date: Oct 2010
Location: Bangladesh
Age: 32
Posts: 1,073
Status: Offline
Sonork: Not Use
Thanks: 2,501
Thanked 3,951 Times in 1,578 Posts
Rep Power: 11
Parvez Telecom is on a distinguished road
Default Re: Plasma Tool v.1.0.2.8 released. Exclusive.

link here

release1028.exe


Hotfile.com: One click file hosting: release.7z
  Reply With Quote
The Following User Says Thank You to Parvez Telecom For This Useful Post:
Old 14-03-13, 09:24 PM   #4
Parvez Telecom
No Life Poster
 
Parvez Telecom's Avatar
 
Join Date: Oct 2010
Location: Bangladesh
Age: 32
Posts: 1,073
Status: Offline
Sonork: Not Use
Thanks: 2,501
Thanked 3,951 Times in 1,578 Posts
Rep Power: 11
Parvez Telecom is on a distinguished road
Default Re: Plasma Tool v.1.0.2.8 released. Exclusive.

2:35:43 PM: Connect phone in Flash mode:


Quote:
Hold the "Back" key and "Power" together
New models with no "Back" key:
Hold the Volume "Down" key and "Power"
Connect cable while holding the keys
2:36:06 PM: Connecting to S1_Bootloader

2:36:06 PM: Handshaking with S1 loader

2:36:06 PM: Model: E15i

2:36:06 PM: Firmware: WORLD-1-8_2.1.1.C.0.0

2:36:06 PM: Released: 20110908

2:36:06 PM: Loading data to phone:
loader.sin

2:36:07 PM: Sending loader.sin is done

PROT_VER="02"
DATE="20100615"
TIME="17:28:00"
VER="R4A045"
CXC="1229-3641"
TYPE="S1_LOADER"
UNIQUE_DEV_ID="39D601C95637AD592ADE7478EDE0ABFFB96 D8372"
SEC_LOCK_STATUS="LOCKED"
OTP_DATA="4DFD7700470404000F080420697FB060"
IMEI="35845204474821"
AID_VERSION="0004"
EROM_AID="0001"
LOADER_AID="0001"
SW_AID="0001"
CUST_AID="0001"
SIM_LOCK_AID="0001"
HWCONF_AID="0001"
PROD_AID="0000"
ACTIVE_LOADER_AID="0001"
MAN_ID="002C"
DEV_ID="00BC"
EXT_DEV_ID="0055"
SIN_VER="0001"
AID_TAMP="NOT_TAMPERED"
MAX_PKT_SZ="00010000"
AUTH_LEVEL="NONE"
AUTH_MET="0001"
CARD_PRESENT="NO"
LOADER_ROOT="S1_Loader_Root_8e35"
EROM_ROOT="S1_EROM_Root_f54f"
SW_ROOT="S1_SW_Root_3edc"
CUST_ROOT="S1_Cust_Root_732f"
SIM_LOCK_ROOT="S1_SL_Root_a640"
HW_CONF_ROOT="S1_HWConf_Root_4b8c"
2:36:08 PM: Phone connected, reading IMEI

2:36:08 PM: Connecting to bootloader

2:36:08 PM: Credits before this unlocking: 8

2:36:08 PM: Reading simlock data

2:36:08 PM: Bakup exists. Not rewrite

2:36:08 PM: Unlock file found

2:36:08 PM: Write existing unlock data

2:36:08 PM: Write new simlock OK

2:36:08 PM: Turn on the phone

2:36:08 PM: Enable USB-Debugging option

2:36:22 PM: Connecting to ADB server

2:36:32 PM: Connection to ADB

2:36:32 PM: Check root status

2:36:32 PM: Kernel: 2.1-update1
2:36:35 PM: No root. Will try root now

2:36:35 PM: Trying to root with a generic rooting tool

2:36:41 PM: Rooting failed, try older root tool

2:36:42 PM: Trying to root with old rooting tool

2:36:53 PM: Wait root

2:37:02 PM: Rooting success

2:37:02 PM: Unlock 7xxx in process

2:37:07 PM: Sended restart command

2:37:19 PM: Restarting phone now

2:37:24 PM: Connecting via ADB

2:37:43 PM: Phone start, delay 8 second

2:37:51 PM: Connected with phone

2:37:51 PM: Checking compatibility

2:37:51 PM: Checking modules

2:38:19 PM: Module ok

2:38:19 PM: Check compatibility. OK

2:38:19 PM: Write unlock

2:38:20 PM: Unlocking phone

2:38:20 PM: Checking new bootrom

2:38:38 PM: New bootrom ok
  Reply With Quote
The Following 2 Users Say Thank You to Parvez Telecom For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 11:42 AM.


Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright DhakaMobile.com 2006-2020. All Rights Reserved.